Residential and Commercial > State Code Status: Tennessee

State Code Status: TENNESSEE


Current Commercial Code

2012 IECC
Adopted 5/6/2016, effective 8/4/2016

The provisions of the 2006 IECC shall continue to apply to the following occupancy classifications as defined by the 2012 IBC:

  1. Moderate-hazard factory industrial, Group F-1;
  2. Low-hazard factory industrial, Group F-2;
  3. Moderate-hazard storage, Group S-1; and
  4. Low-hazard storage, Group S-2;

✔ Can use COMcheck to show compliance.

Current Residential Code

2009 IECC with amendments
Adopted 11/4/2016; effective 2/2/2017

Amendments to the residential code include:

  • Section 402.4.2.1, Testing option has been removed.
  • Section 403.2.2, Sealing Mandatory has been removed.
  • Table N1102.1, Insulation and Fenestration Requirements by Component, has been amended by adding certain exceptions for log walls.

✔ Can use REScheck to show compliance.

Both the residential and commercial code are mandatory statewide. All new and renovated buildings and additions constructed within the state must comply with this standard. Local jurisdictions may adopt more stringent codes. Nashville/Davidson County, for example, has adopted the 2012 IECC.

Read more about:

Tennessee climate zones

Climate Zones: 3A, 4A


Code Adoption and Change Process

Code Change Process

Legislative: Changes to the state’s energy code proceed through the state legislature.

Code Change Cycle

No set schedule.

Next Code Update

No set schedule.

Back to top



History

Tennessee Adopted Codes and History Last updated August 8, 2016

June 2, 2011

The Tennessee State Fire Marshal’s Office announces that it will begin the implementation and enforcement of adopted energy codes for new building project submissions as of July 1, 2011. These include ASHRAE Standard 90.1-2007 for all state buildings and Chapter 11 of the 2009 IRC (with the 2006 IECC as an alternate compliance path) for all other residential and commercial construction.

March 29, 2010

After the passage of legislation in June requiring the state to update its building energy standards, the Tennessee Department of Commerce and Insurance’s Division of Fire Prevention files a rule doing so with the Secretary of State. Pending review by the Attorney General’s office, the rule will enact statewide standards for residential and state-owned building construction. Among the key changes:

  • Effective July 1, 2010: For new construction and additions to state buildings, the energy efficiency provisions (Chapter 13) of the 2006 International Building Code (IBC) will be replaced by ASHRAE Standard 90.1-2007.
  • Effective October 1, 2010: The statewide standard for one- and two-family dwellings and townhouses will be the 2009 International Residential Code (IRC). The energy efficiency provisions (Chapter 11) of the IRC will be replaced by the 2006 IECC.
  • Effective October 1, 2011: Residential additions of 30 or more square feet will be included under the statewide residential standard.

Other provisions in the rule regarding local adoption and enforcement include:

  • Before July 1, 2010: Local jurisdictions that have adopted a residential code that is current within 7 years of its current published edition (i.e. 2003 or later version of the IECC or IRC) must notify the Division of Fire Prevention of their intent to undertake their own enforcement program.
  • The Division of Fire Prevention will enforce the statewide residential standards in jurisdictions that do not have enforcement programs. Local governments that do not adopt and enforce a residential code may opt out of the state enforcement program with a two-thirds majority vote of the local governing body before July 1, 2010 and again after subsequent elections for that body.
January 28, 2010

Companion bills (HB 3215 and SB 3192) are introduced in the Tennessee House and Senate that would establish ASHRAE 90.1-2007 as the minimum energy standard for all new buildings that are not 1- and 2-family dwellings. The bills, however, also allow jurisdictions to adopt Standard 90.1-2001, its equivalent, or a more stringent code. The state currently does not have a mandatory energy code for this construction.

October 2009

The Tennessee Fire Marshal’s office holds public hearings throughout the state on the prospective regulations. Among the proposed changes:

  • The state Fire Marshal’s office will adopt the new state commercial and residential energy codes, which will be based on a combination of the IECC and either the IBC (commercial) or IRC (residential). This combination will be chosen from either the 2006 or 2009 code series.
  • In local jurisdictions that have already adopted codes equivalent to or exceeding the 2006 IECC, the new state codes are not required to be adopted.
  • The state will enforce the IECC for residential and commercial buildings in jurisdictions that do not have inspection programs, but only in those that do not choose to opt out of the state code with a two-thirds vote of the local governing body.
  • Jurisdictions that do have their own inspection program may adopt any edition of the IRC within 7 years of the latest published edition of the IRC. They can enforce any edition of the IECC that is within 7 years of the latest published edition or enforce Chapter 11 (energy efficiency) of an edition of the IRC that is within 7 years of the latest published edition of the IRC.
  • The provisions of the new state code will sunset in 2014.
June 25, 2009

Governor Phil Bredesen signs SB 2300 (Public Chapter 529), placing residential energy efficiency codes under the purview of the State Fire Marshal, who shall select the specific ICC code edition to be implemented. The bill does not reference the IECC, instead establishing the IRC and IBC as adopted codes. During debate on the bill, the state House considers roughly 20 amendments to SB 2300, attempting to allow counties to opt out of the state residential code. An amendment containing a sunset provision for 2014 is approved. The codes provisions of the bill now also include a mechanism through which local legislative bodies can “opt out” their communities with a two-thirds vote. Additionally, for communities that have somewhat outdated codes programs, the state will provide incentives in the form of free training and materials to encourage them to update their standards.

May 14, 2008

The state legislature amends Public Chapter No. 907 by establishing the 2003 IECC as the mandatory minimum energy conservation standard for new residential construction on or after January 1, 2009. The law strongly encourages builders to voluntarily adhere to the 2006 IECC standards for residential and commercial construction.

July 1, 2003

New legislation (HB 2757) becomes effective, giving local codes jurisdictions the option of whether to continue using the 1992 MEC or upgrade to the 2000 IECC with 2001 Amendments. This bill is passed on May 28th and signed by the governor on June 11th.

July 1, 1994

The 1992 Council of American Building Officials (CABO) Model Energy Code (MEC) is adopted pursuant to Public Chapter 193, HB 641.

1978

Tennessee’s first energy code, the 1977 Model Code for Energy Conservation (MCEC), is adopted by the legislature.

Back to top



State Toolkit

This feature allows users to track progress towards goals of adoption, compliance, and implementation in their state. If you have any updates about strides that your state has made in any of the categories below, please contact BCAP.

The Tennessee toolkit is currently under construction.

 


Contacts

Gary Farley
Director, Electrical Residential and Marina Division
Department of Commerce and Insurance
Email: gary.farley@tn.gov

Molly R. Cripps
Director
Office of Energy Programs
Contact: Meet the Team

Lauren Westmoreland
Energy Codes Manager
Southeast Energy Efficiency Alliance (SEEA)
Email: lwestmoreland@seealliance.org


News and Events

BCAP Resources

Helpful Links

Basic Facts

Population: 6,600,299 (US Census Bureau, 2015)

Construction Activity:
New Privately Owned Housing Units Authorized by Permit Type (US Census Construction Statistics)

Year 2014 2015
Total Units 27,632 32,219
1 unit 17,889 21,636
2 units 252 240
3 or 4 units 234 160
5 or more units 9,257 10,183

CO2 Emissions:

Commercial buildings: 3.5 MMT
Residential buildings: 4.2 MMT
(EIA, 2015)

Energy data:

Primary energy source: Petroleum, 667 trillion BTU in 2012

Energy consumption: 2.1 quadrillion BTU in 2012

Energy expenditures: $28.6 billion in 2012

Energy snapshot: 60.4% of homes use electricity for heating, while 32.3% use natural gas.

Originally published on: 

This page was last modified on: March 10, 2017